AEB DI60 Electronic Controller

Files

Wiring Diagram

DI60_Wiring_Diagram

AEB Vehicle List

AEB_Vehicle_List

AEB DI60 is the the last generation electronic controller specially designed for engines with direct petrol injection. It constantly monitors petrol injection time and pressure in the fuel rail to adjust the autogas dose in such a way that engine performance remains unchanged.


DI60 electronic controller (ECU) offers the possibility to convert a wide range of vehicles and provides new tools for reducing the fuel consumption and makes the installation easier. DI60 direct injection ECU is designed for 3-4 cylinders direct injection engines, in which the fuel is injected at a high pressure directly in the combustion chamber.


While running on gas, DI60 considers the petrol injection time and the pressure on the rail to calculate the equivalent amount of gas to be injected in the intake manifold to replicate the performance of the engine running on petrol Through the OBD connection, the calibration software can be used to monitor several engine parameters and any eventual error in the engine control system.

DI60 is equipped with a diagnosis system on every gas component, whose status can be monitored by the calibration software during the installation of the system and at any moment of the engine lifetime. This feature may prevent malfunctioning problems and makes technical interventions easier.

In addition, the calibration tool offers guided procedures for simplifying the system installation and setting. DI60 is equipped with a 60-PIN new-generation automotive connector, with a high IP protection degree (6K9K) against water infiltration, and with an easy leverage system for cable connection/disconnection. The cable is characterized by a security system on the connector that prevents accidental release of the wiring.

Technical Specifications

Product Code

CM03-4000

Supply Voltage

10÷16V

Operating Temperature

-40°C / +110°C

Current Absorption with the Actuators Disabled

Imax ≤0.5A

Current Absorption in Stanby Mode

Istandby ≤0.5A

Actuators Managed

up to 4 injectors with the following characteristics Imax=6, Vbatt,max=16V;

 

2 power outputs for gas solenoid valves

IP Class

6K9K

Map Sensor

AEB P+T

Water Temperature Sensor

4K7

Level Sensors Managed

AEB1050, 0-90Ω, 110-0Ω, non-standard

Up